Vimalnath Enterprise

• High Build system provides higher dry fi lm thickness of more than 1mm in three coats.
• The product can applied directly on existing sound concrete, brickbat coba, screed concrete even without removal
• No protection screed required eliminating the additional weight due to protection layer
• Excellent barrier to carbon dioxide, chloride and sulphate ions.
• Allows water vapour to escape from the structure.
• High resistance to the effect of long-term weathering,
• Durable in all climate conditions including UV attack.
• Excellent bond to concrete and masonry.
• Good crack accommodation capacity.
• Minimum surface preparation needed and low labour.

Nitocote CM210 is a cementitious coating, used for waterproofing water retaining structures and water excluding structures.

Nitocote CM210 provides a waterproof coating suitable for use in water tanks, reservoirs, canals and culverts.

The material can be used on concrete, brick and blockwork substrates.

Suitable for application to below ground retaining wall and foundation structures including construction joints to maintain waterproofing continuity as part of a waterproofing solution conforming to BS8102:2009.

• No primer required
• Suitable for light foot traffic prior to installation of protective finishes
• Withstands high positive and negative hydrostatic pressures
• Excellent bond to concrete and masonry
• Long working time for ease of application 
• Easy application by brush, roller, trowel or spray
• Can be applied to green or damp concrete
• Effective barrier to sulfates and chlorides

 The product is designed to be easily mixed on site using a slow speed drill fitted with a mixing paddle and then applied to the substrate using brush, roller, trowel or spray. The finished coating is of a slightly granular texture.

• Waterproof.
• Allows water vapour to escape from the structure.
• Highly resistant to the effects of long term weathering, durable in all climatic conditions.
• Non-toxic. Excellent bond to concrete and masonry.
• Minimum surface preparation required.
• Flexible.
• Designed to accept light foot traffic.
• Does not require overcoating

• Ensure even concrete surface
• Reduces opportunity of damage to formwork, extending usable life.
• Minimises cleaning of formwork before re-use
• Suitable for use with virtually all types of formwork.
• Inhibits corrosion of steel formwork.